Scott A. Duff Historic Martial Arms

The Sweep of History

ACCESSORIES FOR THE GARAND & M14 SHOOTER

Scott Duff * PO Box 414 * Export, Pennsylvania 15632
1-724-327-8246 E-Mail sdufforder@alltel.net 1-724-327-4192 Fax

This page was last updated on 17 July 2008


S1. M1/M14/M1A THROAT EROSION GAGE - This gage features interchangeable spacers to convert from .30-06 to .308; both calibers are included. A commercially produced tool that works! I have checked the calibration against my GI gages and they are perfect. See also spacer for M1903 rifles below. - $79.95

QTY:

Garand Throat Erosion Gauge with Cal..30 and .308 Winchester Spacers

M1/M14/M1A Throat Erosion Gage and Spacers

S2. M1903 THROAT EROSION GAGE SPACER - Adapts M1/M14/M1A Throat Erosion Gage above for use on M1903. - $18

QTY:

 

S3. MUZZLE WEAR GAGE. Throw away your dummy cartridge! Now using this new tool you can precisely gage the muzzle wear of your rifle with the same accuracy that you gage your throat erosion. This new Muzzle Wear Gage is graduated in the same one thousandth of an inch increments as the Throat Erosion Gage we sell. It may be used to gage the muzzle if any .30 barrel, including the M1 Garand, M1 Carbine, M1903, M1903A3, M1903A4, M1917, and M14/M1A (with flash hider removed). As muzzle wear is critical to accuracy, you cannot afford to be with out this new gage! - $35

QTY:
Muzzle Wear Gage Muzzle Wear Gage
Muzzle Wear Gage Muzzle Wear Gage
Muzzle Wear Gage Muzzle Wear Gage

Muzzle Wear Gage

 

S4. DEWEY ONE-PIECE .30 CALIBER SERVICE RIFLE CLEANING ROD - Correct length for the M1/M14/M1A service rifles. One-piece coated design will not damage rifling. A must have! - $24

QTY:

Dewey Cleaning Rod and Cleaning Rod Guide

Dewey Cleaning Rod and Cleaning Rod Guide

 

S5. DEWEY M1 RIFLE CLEANING ROD GUIDE - Absolutely necessary to properly clean the barrel of your M1 Garand without accelerating muzzle wear and ruining your rifle's accuracy potential. Do not clean your M1 rifle without one of these! - $10

QTY:

S6. DEWEY M14/M1A CLEANING ROD GUIDE - Absolutely necessary to properly clean the barrel of your M14/M1A without accelerating muzzle wear and ruining your rifle's accuracy potential. Do not clean your M14/M1A rifle without one of these! Fits only standard US GI type flash suppressor. - $10

QTY:

 

S7. PLASTILUBE - A 2-ounce jar of synthetic lubricant for service rifles that does not liquefy in hot temperatures or during rapid fire and does not thicken in cold weather. It is the best! - $7.50

QTY:

Plastilube

Plastilube

 

!!Temporarily SOLD OUT!! S8. .30 CALIBER G.I. BORE BRUSH – The real G.I. item!  Brass body, bronze brush. - Three for $4.50. Enter 1 in quantity to order 3 brushes.

QTY:

.30 CALIBER G.I. BORE BRUSH

.30 Caliber G.I. Bore Brushes

 

S11.  .30 CALIBER CLEANING PATCHES.  A package of 200, 2-1/4” square, cotton patches. - $2.25

QTY:

.30 caliber cleaning patches

.30 Caliber Cleaning Patches

 

S12. 2-ROUND/5-ROUND REVERSIBLE GARAND CLIPS - Load 2 rounds for High Power Rifle competition or 5 rounds for hunting. - $4.50

QTY:

2-Round/5-Round Reversible Garand Clips

2-Round/5-Round Reversible Garand Clips

 

S13. SINGLE ROUND GARAND CLIP - Holds 1 round and remains in the rifle until you release it. Designed for slow-fire stages of High Power Rifle competition. - $9

QTY:

Single Round Garand Clip

Single Round Garand Clip

 

S14.  !!Temporarily SOLD OUT!! M1 GARAND REAR HAND GUARD CLIP TOOL.  This Ordnance designed tool is used to remove and install the rear hand guard clip of the M1 Garand.  If you attempt to remove or install a hand guard clip without using this tool you risk cracking or breaking your hand guard.  With the availability of M1 rifle rear hand guards dropping and the prices rising, you can’t afford to damage your hand guard.  This tool makes a near impossible task simple.  It may also be used for the hand guard clip on the M14/M1A rifle. - $39.95

QTY:

Hand Guard Clip Tool

Hand Guard Clip Installation

Hand Guard Clip Tool

 

BOOKS FOR THE AR-15/M16 SHOOTER

The AR-15 Book Section

AR10. The AR-15 Complete Assembly Guide—How to build your own AR-15—by Walt Kuleck with Clint McKee. Since the publication of the author's The AR-15 Complete Owner's Guide, readers have asked for a book that would help guide them through the assembly of their AR-15-type rifle. Ideally, such a book would impart the tips, tricks, pitfalls and "gotchas!" that experienced AR-15 enthusiasts and armorers have discovered and developed over the years.

This is that book. It goes beyond the military manuals in depth and scope, using words and pictures to clearly guide the reader through every operation required to assemble their AR-15-type rifle. You'll learn the best and easiest ways to build your rifle. It won't make you an AR-15 armorer, but it will make you a more knowledgeable owner. You'll be able to do more with (and to) your rifle. You'll also be able to better judge the competence of those whom you choose to work on your rifle, and to discuss your needs more intelligently with them.

In short, if you build it, you'll know how to repair it.

The AR-15 Complete Assembly Guide is a companion volume to The AR-15 Complete Owner's Guide by Walt Kuleck with Scott Duff. The Owner's Guide gives you a look into the history and development of the AR-15. It also gives you a comprehensive description of the many variations of the AR-15 and its clones, and provides a systematic way for you to analyze your needs so you can configure your AR-15 rifle and uppers to meet those needs. The Owner's Guide includes preban serial number cutoff information, detailed descriptions of Colt AR-15 model numbers, and a compendium of available pre-ban magazines to guide your buying decisions. It's the most comprehensive book of its kind on the AR-15. 164 pages, 331 photographs. - $19.95

QTY:

The AR-15 Complete Assembly Guide

 

AR1. The AR-15 Complete Owner’s Guide by Walt Kuleck with Scott Duff. This book provides the prospective, new or experienced AR-15 owner with the in-depth knowledge he or she needs to select, configure, operate, maintain and troubleshoot his or her rifle. The Guide covers history, applications, details of components and subassemblies, operating, cleaning, maintenance, and future of perhaps the most versatile rifle system ever produced. A comprehensive Colt model number table and pre-/post-ban serial number information are included. This is the book I wish had existed prior to buying my first AR-15! Soft cover, 6” x 9”, 212 pages, 164 photographs & line drawings. - $22.95

QTY:

The AR-15 Complete Owner's Guide>

 

AR5. The Black Rifle by R. Blake Stevens & Edward C. Ezell. The most comprehensive book yet written on the history of design and development of the M16 rifle. No serious student of U.S. Martial Arms should be without this book! Hard cover, 9” x 11-1/2”, 400 pages - $59.95 Free Shipping

QTY:

'The Black Rifle' by R. Blake Stevens & Edward C. Ezell

 

AR11. Black Rifle II by Christopher R. Bartocci. This newly published volume is a sequel to The Black Rifle – M16 Retrospective which was first published in 1987. Much has happened to the M16/AR-15 since that book was published. This new volume brings the serious student of US Martial Arms up to date with all that has happened with the M16 since then. The book begins with a detailed study of the development, trials, and adoption of the M16A2 rifle. Also covered in detail are the M4 and M4A1 Carbines. Chapters are devoted to the Colt 9mm SMG, M16A3, M16A4, HKM4, rebirth of the AR-10, and Canadian contributions. A full chapter is devoted to the Colt AR-15 semi-automatic family of rifles and carbines. A Colt Model Reference Guide and Component Guide are included. My favorite chapters deal with the US Special Operations Command (SOCOM) CQB (Close Quarters Battle) Carbines and the SPR (Special Purpose Rifle) Sniper Rifles now assigned the nomenclature Mk 12 Mod 0 and Mk 12 Mod 1. These are the sniper rifles used so successfully by Special Operations troops in Afghanistan and Iraq. When the history of these wars is written, this rifle will rewrite the book on sniping. This is the only source for information on this most interesting sniper rifle. Volume I, The Black Rifle remains available and is the beginning of the M16 story, Black Rifle II is the continuation of the story of the US military rifle that has been the standard issue rifle for a longer period of time than any other long arm in US history. If you are a serious student of US Martial Arms, a fan of the AR-15, or interested in what small arms our troops are currently using you must have this book. The author did a wonderful job with this work. Hard cover, 9” x 11-1/2”, 408 pages, 626 illustrations. - $69.95 Free Shipping!

QTY:

'Black Rifle II' by Christopher R. Batrocci

 

Live Outside the USA?  Read this!

 

Scott Duff Publications is pleased to be able to ship books published by Scott Duff Publications anywhere in the world.  Shipping will be by Air Post, at rates set by the International Postal Union for air mail from the USA.  Credit Card payments will be accepted, with shipping calculated & charged at the time of dispatch.

 

Scott Duff Publications is able to ship firearms, firearms parts, tools, or accessories, or books from publishers other than Scott Duff Publications only to USA addresses.  We can ship only books published by Scott Duff Publications to addresses outside the USA

 

Thank you for your understanding.


To be notified when new items are added, Subscribe to ScottDuffFirearms!

Click HERE for Terms and Conditions!